EN
TM/THV High Performance Fluoroelastomer Alternatives for Chemical Processing
Material:TM/THV
Hardness: 30A-80A Shore A
Color: Customizable
Operating temperature:-30°C to +180°C
Typical applications: Printing rubber rollers, sealing rings
Note: We only supply rubber compounds (customizable in hardness, color, and formulation). We do not manufacture or sell any finished rubber products. After receiving the compound, customers may carry out downstream processes such as molding and curing themselves or through a third party.
- Description
- Applications
- Specifications
- FAQ
- Recommended Products
Description
TM / THV are flexible fluoroplastics that are heat-sealable, co-extrudable, with high transparencyand resistance to highly corrosive media. Both are suitable for extreme chemical environments.
Applications
Manufacturing oil delivery hoses
Seals for aircraft fuel tanks, cabins, and rocket propellants
Gas meter diaphragms
Printing rubber rollers, sealing rings
Specifications
|
Common Name |
Polysulfide Rubber Compound |
|
Hardness(SHA) |
30A~80A |
|
ASTM D-2000 Classification |
DE |
|
Tensile(Mpa) |
10~18 |
|
Elongation at Break(%) |
300~500 |
|
Temperature Range |
-30℃~+180℃ |
|
Specific Gravity（g/cm³） |
1.90~2.00 |
|
Resistances |
Excellent low-temperature flexibility |
|
Good insulating property |
|
|
Superior oil and solvent resistance |
|
|
Outstanding ozone resistance |
|
|
Production process |
Extrusion |
|
Formula & color |
Custom |
|
Shelf Life |
With accelerator: 7–10 days; without accelerator: 1 year. |
|
Storage conditions |
Store in a cool, dry place. After opening, seal tightly to prevent moisture absorption and loss of active ingredients. |
FAQ
Q: Do you sell finished products or raw materials?
A: We only supply rubber compounds, not finished products. You can choose hardness, color, and formulation based on your product needs. We mix to order and deliver.
Q: What rubber types can you handle?
A: Common types include NR, SBR, BR, NBR, EPDM, CR, silicone rubber, fluororubber, etc., subject to actual capability.
Q: Are hardness and formulation linked?
A: No. The same hardness can be achieved with different formulations. The difference lies in tensile strength, tear resistance, compression set, oil resistance, aging resistance, etc. Tell us your application and we’ll recommend the right system.
Q: Can you compound to the customer’s formula?
A: Yes. We support toll processing with customer-supplied materials or mixing to a customer-specified formula. We can also recommend a formula based on performance requirements.
Q: How do you ensure batch-to-batch consistency?
A: Through raw material batch control, fixed mixing process parameters, and sampling tests (hardness, specific gravity, Mooney viscosity, etc.).
